Oracle Netra SPARC S7-2 Service Manual page 223

7. Connect the LED cable to the LED assembly.
8. If you installed the LED board as part of another component's removal or
installation procedure, return to that procedure.
See "Component Service Task Reference" on page 47
Review this information and complete these prerequisites in this order.
9.
See:
"Install the Air Duct" on page 236
■
"Install the PSU Duct" on page 240
■
"Secure the Drive Cage" on page 241
■
"Install the Filter" on page 82
■
10. Complete these postrequisites in this order to finish the installation procedure.
See:
"Returning a Server to Operation" on page 235
■
"Verify the LED Board" on page 224
■
Related Information
"Remove the LED Board and Cable" on page 218
■
Install the LED Board and Cable
for assistance.
Servicing the LED Board 223