Interpreting Leds - Oracle Netra SPARC S7-2 Service Manual

Interpreting LEDs

Related Information
"Log In to Oracle ILOM (Service)" on page 26
■
"Identify Faulted Components" on page 27
■
"Device Paths" on page 20
■
"Interpreting LEDs" on page 30
■
Interpreting LEDs
Use these steps to determine if an LED indicates that a component has failed.
Step
1.
2.
Related Information
"Checking for Faults" on page 25
■
"Performing Advanced Troubleshooting" on page 34
■
"Clear a Fault Manually" on page 40
■
30 Netra SPARC S7-2 Server Service Manual • February 2017
Description
Check the LEDs on the front and rear of the server.
Check the LEDs on the individual components.
Component LEDs might not be lit even though the
component is faulty. Rely on software to determine
if a component is faulty, see "Identify Faulted
Components" on page 27.
Links
■ "Front Panel LEDs" on page 31
■ "Rear Panel LEDs" on page 33
■ "Servicing SAS Drives" on page 85
■ "Servicing NVMe Storage
Drives" on page 97
■ "Servicing Fan Modules" on page 151
■ "Servicing Power Supplies" on page 131
■ "Servicing DIMMs" on page 159
■ "Servicing PCIe Cards" on page 169
■ "Servicing the Internal HBA PCIe
Card" on page 179
■ "Servicing the Motherboard" on page 225