SAS Drive Configuration
"Component Service Task Reference" on page 47
■
"Preparing for Service" on page 43
■
"Returning a Server to Operation" on page 235
■
SAS Drive Configuration
The server has eight drive slots. See
Modules)" on page
Caution -
Related Information
"Install a SAS Drive" on page 92
■
"SAS Drive LEDs" on page 86
■
"Locate a Faulty Drive" on page 87
■
SAS Drive LEDs
The status of each SAS drive is represented by the same three LEDs. The LEDs are located
above the release button of each drive. See
This illustration and table describe the functionality of the drive LEDs.
86
Netra SPARC S7-2 Server Service Manual • February 2017
14.
Overheating hazard. There must be no empty drive slots. Use fillers.
"Component Locations (Storage, Power, NVMe, and Fan
"Front Panel Components (Service)" on page
17.