Remove the USB Board
5.
Disconnect the cable from the motherboard.
6.
Gently lift the USB board and cable out of the chassis.
Set the USB board aside.
7.
8.
Consider your next step.
If you removed the USB board as part of a replacement operation, install a
■
new USB board.
See
If you removed the USB board as part of another component's removal or
■
installation procedure, return to that procedure.
See
Related Information
"Install the USB Board" on page 113
■
"Preparing for Service" on page 43
■
"Returning a Server to Operation" on page 235
■
112
Netra SPARC S7-2 Server Service Manual • February 2017
"Install the USB Board" on page
"Component Service Task Reference" on page
113.
47.