Log In To Oracle Ilom (Service) - Oracle Netra SPARC S7-2 Service Manual

Log In to Oracle ILOM (Service)

Step
2.
3.
Related Information
"Performing Advanced Troubleshooting" on page 34
■
"Clear a Fault Manually" on page 40
■
"Interpreting LEDs" on page 30
■
Log In to Oracle ILOM (Service)
At the terminal prompt, type:
ssh root@SP-IP-address
Password: password
Oracle (R) Integrated Lights Out Manager
Version 3.2.x
Copyright (c) 2016, Oracle and/or its affiliates, Inc. All rights reserved.
->
Related Information
"Identify Faulted Components" on page 27
■
"Identify Disabled Components" on page 29
■
"Device Paths" on page 20
■
"Interpreting LEDs" on page 30
■
26 Netra SPARC S7-2 Server Service Manual • February 2017
Description
Run the show disabled command to
display information about components
that have been disabled either
intentionally or because of a failure.
Plan to service any components that are
degraded or might need service soon to
minimize system downtime.
Identify the names of components that
require service as reported by diagnostic
software.
Links
"Identify Disabled Components" on page 29
"Device Paths" on page 20