Servicing The Usb Board; Remove The Usb Board - Oracle Netra SPARC S7-2 Service Manual

Servicing the USB Board

The USB board provides USB 2.0 connectivity at the front of the chassis. See
Locations (Storage, Power, NVMe, and Fan Modules)" on page
Description
Replace the faulty USB board.
Remove the USB board as part of another
component's service operation.
Install the USB board as part of another
component's service operation.
Related Information
"Identifying Components" on page 13
■
"Detecting and Managing Faults" on page 25
■
"Component Service Task Reference" on page 47
■
"Preparing for Service" on page 43
■
"Returning a Server to Operation" on page 235
■

Remove the USB Board

Removing the USB board is a cold-service operation. You must power off the server before you
remove the USB board.
Consider your first step.
1.
If you have not prepared for service, do so now.
■
14.
Links
"Detecting and Managing Faults" on page 25
"Remove the USB Board" on page 109
"Install the USB Board" on page 113
"Remove the USB Board" on page 109
"Install the USB Board" on page 113
"Component
Servicing the USB Board 109