Oracle Netra SPARC S7-2 Service Manual page 201

If you have not already removed the fan modules and tray, you will need to before
disconnecting the cable from the motherboard. See
7. Set the cable aside.
8. Consider your next step.
If you are replacing a cable, install the new cable.
■
See "Install the Drive Power Cable" on page
If you removed a cable as part of another component's removal or
■
installation procedure, return to that procedure.
See "Component Service Task Reference" on page
Related Information
"Install the Drive Power Cable" on page 202
■
"Component Locations (Storage, Power, NVMe, and Fan Modules)" on page 14
■
"Component Locations (Motherboard, Memory, and PCIe Cards)" on page 16
■
"Preparing for Service" on page 43
■
Remove the Drive Power Cable
Step 3.
202.
47.
Servicing the Cables 201