3.
Tighten the four screws securing the drive cage to the server.
4.
Connect the cables to the drive backplane, and connect the cable attached to the
USB board.
These cables (2, 3, 4, and 6) are visible in
Install the filter.
5.
See
"Install the Filter" on page
6.
Consider your next step.
If you secured the drive cage as part of another component's service
■
procedure, return to that procedure.
See
"Component Service Task Reference" on page 47
Otherwise, install the fan tray.
■
"Cable Configurations" on page
82.
Secure the Drive Cage
194.
for assistance.
Returning a Server to Operation
243