Oracle Netra SPARC S7-2 Service Manual page 248

Install the Top Cover
4. Secure the top cover with the two captive screws at the rear.
Install the server into the rack.
5.
Refer to the
6. Connect the power cords.
See "Connect AC Power Cords" on page
Related Information
"Install the Fan Tray" on page 244
■
"Remove the Top Cover" on page 67
■
"Connect AC Power Cords" on page 249
■
248 Netra SPARC S7-2 Server Service Manual • February 2017
Netra SPARC S7-2 Server Installation Guide, installing the server into the rack.
249.