Servicing The Sas Drive Signal Cable - Oracle Netra SPARC S7-2 Service Manual

No.
3
4
5
6
7
8
9
Related Information
"Component Locations (Storage, Power, NVMe, and Fan Modules)" on page 14
■
"Component Locations (Motherboard, Memory, and PCIe Cards)" on page 16
■
"Preparing for Service" on page 43
■
"Returning a Server to Operation" on page 235
■

Servicing the SAS Drive Signal Cable

These topics describe how to remove and install SAS drive signal cables.
Description
Replace a faulty cable.
Remove a cable as part of another component's
service operation.
Install a cable as part of another component's
service operation.
Related Information
"Identifying Components" on page 13
■
Description
Drive power cable
SAS drive signal cable (SAS 0-3)
Drive backplane data cable
NVMe B drive cable
LED board cable
SAS drive signal cable (SAS 4-7)
NVMe A drive cable
Servicing the SAS Drive Signal Cable
Links
"Servicing the Drive Power Cable" on page 199
"Servicing the SAS Drive Signal Cable" on page 195
"Servicing HBA SAS Cables" on page 211
"Servicing the Drive Backplane" on page 117
"Servicing the NVMe Cables" on page 207
"Servicing the LED Board" on page 217
"Servicing the SAS Drive Signal Cable" on page 195
"Servicing HBA SAS Cables" on page 211
"Servicing the NVMe Cables" on page 207
Links
"Detecting and Managing Faults" on page 25
"Remove the SAS Drive Signal Cable" on page 196
"Install the SAS Drive Signal Cable" on page 197
"Remove the SAS Drive Signal Cable" on page 196
"Install the SAS Drive Signal Cable" on page 197
Servicing the Cables 195