Oracle Netra SPARC S7-2 Service Manual page 145

9. Grasp the two motherboard handles, and slide the motherboard forward off of
the alignment pins.
See "Servicing the Motherboard" on page 225
are not removing the motherboard. You are moving it slightly so that you can remove the PDB.
10. Lift the PDB bus bars, and remove the PDB from the server.
Set the PDB aside.
11.
Consider the next step.
12.
If you are replacing a faulty PDB, install the new PDB.
■
See "Install the PDB" on page
If you removed the PDB as part of another component's service procedure,
■
return to that procedure.
See "Component Service Task Reference" on page
Related Information
"Install the PDB" on page 146
■
"Preparing for Service" on page 43
■
"Returning a Server to Operation" on page 235
■
for cautions. For this service procedure, you
146.
47.
Remove the PDB
Servicing the PDB 145