Oracle Netra SPARC S7-2 Service Manual page 61

(callout 2), and pull the latching bracket out of the left slide-rail and put it
aside (frames 3 and 4).
Disconnect connector.
5.
a. Place your left arm under the CMA to support it.
b. Use your right thumb to push in (toward the right) on the connector C
release tab labeled PUSH (callout 1), and pull connector C out of the right
slide-rail (frame 1 and 2).
No.
1
Disconnect connector B.
6.
a. Place your right arm under the CMA to support it and grasp the rear end of
connector B with your right hand.
Description
Connector C release tab
(labeled PUSH)
Remove the Cable Management Arm
Preparing for Service 61