Power Supply Leds; Locate A Faulty Power Supply - Oracle Netra SPARC S7-2 Service Manual

Power Supply LEDs

Related Information
"Identifying Components" on page 13
■
"Detecting and Managing Faults" on page 25
■
"Component Service Task Reference" on page 47
■
"Preparing for Service" on page 43
■
"Returning a Server to Operation" on page 235
■
Power Supply LEDs
The status of each power supply is represented by two LEDs. These are located to the left of
the fan of each power supply. See
(Service)" on page
Icon Location
Top
Top
Related Information
"Locate a Faulty Power Supply" on page 132
■
"Remove a Power Supply" on page 134
■
"Front Panel Components (Service)" on page 17
■
"Rear Panel Components (Service)" on page 18
■

Locate a Faulty Power Supply

You must determine which power supply is faulty before you replace it.
1. Check to see if any System Service Required LEDs are lit or flashing.
See "Front Panel Components (Service)" on page
132 Netra SPARC S7-2 Server Service Manual • February 2017
18.
Name Color
AC or DC Green
Attention Amber
Service Required
"Rear Panel LEDs" on page 33
State and Meaning
On – Input power present and good.
Off – Input power not present.
On – Normal fault detected.
Off – No faults detected.
17.
and "Rear Panel Components