Connect Ac Power Cords; Power On The Server (Oracle Ilom) - Oracle Netra SPARC S7-2 Service Manual

Connect AC Power Cords

1. Reconnect the power cords to the power supplies.
As soon as the power cords are connected, standby power is applied. Depending on how
Note -
the firmware is configured, the system might boot at this time.
2. Power on the server.
See one of these topics:
"Power On the Server (Oracle ILOM)" on page 249
■
"Power On the Server (Power Button)" on page 250
■
Related Information
"Install the Top Cover" on page 246
■
"Disconnect Power Cords and Data Cables" on page 52
■
"Power On the Server (Oracle ILOM)" on page 249
■
"Power On the Server (Power Button)" on page 250
■

Power On the Server (Oracle ILOM)

Access Oracle ILOM.
1.
Connect AC Power Cords
Returning a Server to Operation 249