Remove a Server From the 2-Post, 19-inch Rack
6.
Remove the two screws from each side bracket at the front of the posts.
7.
Lift the server from the rack and set it aside on an antistatic mat.
8.
Remove the top cover.
See
"Remove the Top Cover" on page
Related Information
"Prevent ESD Damage" on page 55
■
"Remove the Top Cover" on page 67
■
"Install the Top Cover" on page 246
■
"Safety Information" on page 44
■
66
Netra SPARC S7-2 Server Service Manual • February 2017
67.