Service Tools; Fillers - Oracle Netra SPARC S7-2 Service Manual

Service Tools

ESD mat
■
Antistatic bag used to wrap a replacement part, if turned inside out after removing the part
■
and placed on an antistatic surface
A disposable ESD mat (shipped with some replacement parts or optional system
■
components)
Related Information
"Service Tools" on page 46
■
"Component Service Task Reference" on page 47
■
"Removing Power From a Server" on page 49
■
Service Tools
You need these tools for most service operations:
Antistatic wrist strap
■
Antistatic mat
■
Small flat head screwdriver
■
No. 1 Phillips screwdriver
■
No. 2 Phillips screwdriver
■
Related Information
"Safety Information" on page 44
■
"Component Service Task Reference" on page 47
■
"Accessing Internal Components" on page 55
■

Fillers

Servers might be shipped with replacement fillers for hard drives and PCI cards. A filler is an
empty metal or plastic enclosure that does not contain any functioning system hardware or cable
connectors.
The fillers are installed at the factory and must remain in the server until you replace them with
a functional component to ensure proper airflow through the system. If you remove a filler and
46 Netra SPARC S7-2 Server Service Manual • February 2017