Oracle Netra SPARC S7-2 Service Manual page 188

Verify the Internal HBA PCIe Card
-> set /SYS/MB/PCIE7 clear_fault_action=true
Are you sure you want to clear /SYS/MB/PCIE1 (y/n)? y
Set 'clear_fault_action' to 'true'
->
3. Verify that the card is recognized.
-> show /System/PCI_Devices/Add-on
/System/PCI_Devices/Add-on
Targets:
Device_7
...
->
If the card is not recognized, check its installation.
4. Verify that the card is identified.
-> show /System/PCI_Devices/Add-on/Device_7
5. If the card is not recognized, try to locate it.
See "Locate a Faulty PCIe Card" on page
Related Information
"Remove the Internal HBA PCIe Card" on page 179
■
"Install the Internal HBA PCIe Card" on page 183
■
"PCIe Card Configurations" on page 170
■
"Locate a Faulty PCIe Card" on page 172
■
188 Netra SPARC S7-2 Server Service Manual • February 2017
172.