Oracle Netra SPARC S7-2 Service Manual page 123

2. Tighten the five screws.
3. If you installed the drive backplane as part of another component's service
procedure, return to that procedure.
See "Component Service Task Reference" on page
4. Complete these tasks in this order.
See:
"Secure the Drive Cage" on page 241
■
"Install a SAS Drive" on page 92
■
Install all drives.
Rotate the air filter up until the latches click.
5.
See "Install the Filter" on page
Finish the installation procedure.
6.
47.
and "Install an NVMe Drive" on page
82.
Install the Drive Backplane
100.
Servicing the Drive Backplane 123