Servicing Hba Sas Cables; Remove Hba Sas Cables - Oracle Netra SPARC S7-2 Service Manual

Servicing HBA SAS Cables

These topics describe how to remove and install the HBA SAS cables.
Description
Replace a faulty cable.
Remove a cable as part of another component's
service operation.
Install a cable as part of another component's
service operation.
Related Information
"Identifying Components" on page 13
■
"Detecting and Managing Faults" on page 25
■
"Component Service Task Reference" on page 47
■
"Preparing for Service" on page 43
■
"Returning a Server to Operation" on page 235
■

Remove HBA SAS Cables

Replacing the cable assembly is a cold-service procedure that must be performed by qualified
service personnel. The server must be completely powered down before performing this
procedure.
Prepare for servicing.
1.
See "Preparing for Service" on page
Remove all of the fan modules and fan tray.
2.
See:
"Remove a Fan Module" on page 153
■
Remove all fan modules.
"Remove the Fan Tray" on page 69
■
Links
"Detecting and Managing Faults" on page 25
"Remove HBA SAS Cables" on page 211
"Install HBA SAS Cables" on page 213
"Remove HBA SAS Cables" on page 211
"Install HBA SAS Cables" on page 213
43.
Servicing HBA SAS Cables
Servicing the Cables 211