Verify The Pdb - Oracle Netra SPARC S7-2 Service Manual

"Secure the Drive Cage" on page 241
■
"Install the Fan Tray" on page 244
■
"Install a Fan Module" on page 155
■
Install all fan modules.
14. Complete these postrequisites in this order to finish the installation procedure.
See:
"Returning a Server to Operation" on page 235
■
"Verify the PDB" on page 149
■
Related Information
"Verify the PDB" on page 149
■
"Returning a Server to Operation" on page 235
■

Verify the PDB

After you install the PDB, you can verify its functionality.
1. Access Oracle ILOM.
See "Log In to Oracle ILOM (Service)" on page
2. Reset the PDB.
-> set /SYS/PDB clear_fault_action=true
Are you sure you want to clear /SYS/PDB (y/n)? y
Set 'clear_fault_action' to 'true'
->
3. Verify that the PDB is no longer faulty, then return to this procedure.
See "Determine if the PDB Is Faulty" on page
Related Information
"Install the PDB" on page 146
■
"Determine if the PDB Is Faulty" on page 141
■
26.
141.
Verify the PDB
Servicing the PDB 149