Servicing Sas Cables (Fru); Remove Sas Storage Drive Cables - Oracle X8-2L Service Manual

Servicing SAS Cables (FRU)

The following section describes how to service SAS cables. SAS cables are field-replaceable
units (FRUs). For more information about FRUs, see
and "Field-Replaceable Units" on page
SAS cables should be removed and replaced only by authorized Oracle Service
Caution -
personnel.
The system supplies power to the cables even when the server is powered off.
Caution -
To avoid personal injury or damage to the server, you must disconnect power cords before
servicing the cables.
These procedures require that you handle components that are sensitive to
Caution -
electrostatic discharge. This sensitivity can cause the component to fail. To avoid damage,
ensure that you follow electrostatic discharge safety measures and antistatic practices. See
"Electrostatic Discharge Safety" on page
This section covers the following procedures:
"Remove SAS Storage Drive Cables" on page 189
■
"Install SAS Storage Drive Cables" on page 192
■
Related Information
"Servicing Storage Drives (CRU)" on page 69
■
"Servicing the Disk Backplane (FRU)" on page 159
■
"Servicing NVMe Cables (FRU)" on page 195
■

Remove SAS Storage Drive Cables

Prepare the server for service.
1.
"Illustrated Parts Breakdown" on page 20
22.
52.
Servicing SAS Cables (FRU) 189