Oracle Netra SPARC S7-2 Service Manual page 62

Remove the Cable Management Arm
b. Use your left thumb to pull the connector B release lever to the left away
from the right slide-rail (callout 1) and use your right hand to pull the
connector out of the slide-rail (frames 1 and 2).
No.
1
Disconnect connector A.
7.
Place your left arm under the CMA to support it and grasp the rear end of
a.
connector A with your left hand.
62 Netra SPARC S7-2 Server Service Manual • February 2017
Description
Connector B release lever