Oracle Netra SPARC S7-2 Service Manual page 96

Verify a SAS Drive
5. Verify that the blue Ready to Remove LED is no longer lit on the drive that you
installed.
See "SAS Drive LEDs" on page
When the drive is functioning properly, configure the drive.
6.
Refer to the OS documentation.
Related Information
"Install a SAS Drive" on page 92
■
"SAS Drive Configuration" on page 86
■
"SAS Drive LEDs" on page 86
■
"Locate a Faulty Drive" on page 87
■
96 Netra SPARC S7-2 Server Service Manual • February 2017
86.