Safety Information; Safety Symbols - Oracle Netra SPARC S7-2 Service Manual

Safety Information

Step Description
You can now service the USB board, the motherboard, and the
PDB.
Related Information
"Identifying Components" on page 13
■
"Detecting and Managing Faults" on page 25
■
"Returning a Server to Operation" on page 235
■
Safety Information
For your protection, observe these safety precautions when setting up your equipment:
Follow all cautions and instructions marked on the equipment and described in the
■
documentation shipped with your system.
Follow all cautions and instructions marked on the equipment and described in the
■
SPARC S7-2 Server Safety and Compliance Guide, Compliance Model No.:
Ensure that the voltage and frequency of your power source match the voltage and
■
frequency inscribed on the equipment's electrical rating label.
Follow the electrostatic discharge safety practices as described.
■

Safety Symbols

Note the meanings of these symbols that might appear in this document.
Caution -
equipment damage, follow the instructions.
Caution -
touched.
44 Netra SPARC S7-2 Server Service Manual • February 2017
There is a risk of personal injury or equipment damage. To avoid personal injury and
Hot surface. Avoid contact. Surfaces are hot and might cause personal injury if
Link
"Servicing the LED Board" on page 217
"Servicing the USB Board" on page 109
"Servicing the Motherboard" on page 225
"Servicing the PDB" on page 141
Netra
9600.