Remove A Dimm; Install A Dimm - Oracle Netra SPARC S7-2 Service Manual

Remove a DIMM

1. To remove a DIMM, rotate both DIMM socket ejectors outward as far as they will
go, then carefully lift the DIMM straight up to remove it from the socket.
2. Replace each failed DIMM with either another DIMM of the same rank size (quad-
rank, dual-rank, or single-rank) or leave the socket empty.
See "Install a DIMM" on page
Related Information
"Understanding DIMM Layout and Population Rules" on page 160
■
"Install a DIMM" on page 163
■

Install a DIMM

1. If you are replacing a DIMM, perform these tasks.
a. Unpack the replacement DDR4 DIMM, and place it on an antistatic mat.
163.
Remove a DIMM
Servicing DIMMs 163