Install The Air Duct - Oracle Netra SPARC S7-2 Service Manual

Install the Air Duct

Step Task
9. Verify the installation of the component, if you serviced
the components in Step 1, Step 2, Step 3, Step 5, or these
components.
■ Drives
■ Power supplies
Related Information
"Identifying Components" on page 13
■
"Detecting and Managing Faults" on page 25
■
"Preparing for Service" on page 43
■
Install the Air Duct
Perform this task when you have previously removed the air duct.
1. Move any loose cables to the gap between the DIMMs and the server walls.
Note -
NVMe cables is especially tight.
236 Netra SPARC S7-2 Server Service Manual • February 2017
Ensure that all cables clear the air duct and other components. The space around the
Link
"Verify the Motherboard" on page 234
"Verify the PDB" on page 149
"Verify a DIMM" on page 166
"Verify the LED Board" on page 224
"Verify the Drive Backplane" on page 124
"Verify a Fan Module" on page 157
"Verify a PCIe Card" on page 177
"Verify a SAS Drive" on page 95
"Verify the Operation of an NVMe Storage Drive" on page 102
"Verify a Power Supply" on page 138