Oracle Netra SPARC S7-2 Service Manual page 142

Determine if the PDB Is Faulty
1. Check to see if any Server Service Required LEDs are lit or flashing.
See "Front Panel Components (Service)" on page
2. In Oracle ILOM, check the health of the power system.
-> show /System/Power
/System/Power
Targets:
Properties:
health = OK
health_details = -
...
->
3. Verify that the PDB is faulty.
For example, type:
-> show faulty
Target
--------------------+------------------------+-------------------------------
/SP/faultmgmt/0
...
->
If you see /SYS/PDB under the Value heading, the PDB is faulty.
■
If a FRU value different from /SYS/PDB is displayed, see
■
Reference" on page 47
4.
Use the Oracle ILOM faultmgmt shell to identify the faulty component.
See "Identify Faulted Components" on page
Check the Fault class and Description fields for more information.
5. If the PDB is faulty, replace it.
See "Remove the PDB" on page
If you are unable to determine if the PDB is faulty, seek further information.
6.
See "Detecting and Managing Faults" on page
Related Information
"Remove the PDB" on page 143
■
"Verify the PDB" on page 149
■
"Detecting and Managing Faults" on page 25
■
142 Netra SPARC S7-2 Server Service Manual • February 2017
| Property
| fru
to identify which component is faulty.
27.
143.
17.
| Value
| /SYS/PDB
"Component Service Task
25.