Setup; None Screen - Thermo Scientific SmartView SV100A User Manual

Screen Types

Setup

None Screen

6-2 SV100A/SV10AC User Guide
Screens are selected by pressing the Menu/View button on the button bar.
Setup
To set up a screen:
1. Go to the Program menu screen by pressing the Menu/View button on
the button bar.
2. Select Screens/History and the screen in Figure 6–2 opens.
Figure 6–2.
3. Determine the screen type desired and refer to the appropriate section
in this chapter. Once you have configured a screen, press Apply to save
it.
Note A password may be required to edit screen setups. Enter the correct
password to unlock the protected items. Items that are password protected
are unavailable unless the correct password is entered. ▲
Select this type of screen to delete or clear a previously programmed screen.
Figure 6–3. None screen: Screen definition
Thermo Fisher Scientific