Table of Contents
Advertisement
DAEWOO M-150 BL2
GENERATOR
Removal Procedure
1. Disconnect the negative battery cable.
2. Disconnect the harness connector.
D Remove the battery harness connector nut to dis-
connect the battery positive connector (1).
D Disconnect the generator harness connector (2).
D102E504
3. Remove the generator drive belt.
D Loosen the generator adjusting bolt (1).
D Remove the lower bracket-to-generator bolt and
nut (2).
D Separate the generator drive belt from the genera-
tor.
D102E505
4. Remove the engine mounting lower bracket.
D Remove the engine mounting lower bracket, at-
taching reaction rod bolt and nut (1).
D Remove the engine mounting lower bracket bolts
(2).
D Remove the engine mounting lower bracket (3).
D102E506
5. Remove the generator.
D Remove the generator adjusting bolt (1).
D Carefully remove the genrator (2).
D102E507
ENGINE ELECTRICAL 1E – 15
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the MATIZ and is the answer not in the manual?
Questions and answers
Δεν βρίσκω στην ιστοσελίδα σας, Κεραία κλειδαριάς τιμονιού ,.. Imobilaizer .. Τον δακτύλιο αυτού, που με ένα φισάκι με δύο καλώδια πάει και κουμπώνει στον αφαλό Ευχαριστώ