Ignition Coil - Daewoo MATIZ Service Manual

1E – 18 ENGINE ELECTRICAL
D102E517
D102E518
4–7 NSm
D12E519A

IGNITION COIL

Removal Procedure
1. Disconnect the negative battery cable.
2. Disconnect the ignition wires and ignition coil connec-
tor.
D Disconnect the ignition wire (1).
D Disconnect the ignition coil connector by pushing
the connector's lock(2).
3. Remove the ignition coil.
D Remove the screws (1).
D Remove the ignition coil (2).
Installation Procedure
1. Install in the reverse order of removal.
2. Install the ignition coil screws.
Tighten
Tighten the ignition coil screws to 4–7 NSm (35–62 lb-
in).
DAEWOO M-150 BL2