No Malfunction Indicator Lamp - Daewoo MATIZ Service Manual

1F – 30 ENGINE CONTROLS
Circuit Description
When the ignition is turned ON, the Malfunction Indica-
tor Lamp (MIL) will be turned ON and remain ON until
the engine is running, if no Diagnostic Trouble Codes
(DTCs) are stored. Battery voltage is supplied through
the ignition switch directly to the MIL telltale. The Engine
Control Module (ECM) controls the MIL by providing a
ground path through the MIL control circuit to turn ON
the MIL.
Diagnostic Aids
An open ignition F16 fuse will cause the entire cluster to
be inoperative.

NO MALFUNCTION INDICATOR LAMP

Check the battery and ignition feed circuits for poor con-
nections if the MIL is intermittent.
Any circuitry, that is suspected as causing an intermit-
tent complaint, should be thoroughly checked for
backed-out terminals, improper mating, broken locks,
improperly formed or damaged terminals, poor terminal-
to-wiring connections or physical damage to the wiring
harness.
MAA1F030
DAEWOO M-150 BL2