Administer Access Example - 3Com LANPLEX 6000 User Manual

2-2 C 2: H
HAPTER OW TO
Initial user access
Administer Access
Example
Menu options: ------------------------------------------------------------------
Type 'q' to return to the previous menu or ? for help.
--------------------------------------------------------------------------------
Select a menu option (system):
Write Access
Example
Menu options: ------------------------------------------------------------------
Type 'q' to return to the previous menu or ? for help.
--------------------------------------------------------------------------------
Select a menu option (system):
U A
SE THE DMINISTRATION
The passwords are stored in nonvolatile memory. You must enter the
password correctly before you are allowed to continue. The first time you
access the Console, the password is null.
As the initial user, access the system at the administer level and press return
at the password prompt.
The following examples show how the top-level menu structure changes
based on the level of access. For information about setting passwords, see
page 4-2.
If you have administer access, each menu contains all options, as shown in
the system menu example below:
display
softwareUpdate
baseline
serialPort
password
name
time
screenHeight
consoleLock
panelLock
ctlKeys
nvData
reboot
If you have write access, the system menu contains a subset of the
complete menu, focusing on the network, as shown below:
display
baseline
serialPort
name
screenHeight
C
ONSOLE
- Display the system configuration
- Load a new revision of system software
- Administer a statistics baseline
- Administer the terminal and modem serial ports
- Set the console passwords
- Set the system name
- Set the date and time
- Set the console screen height
- Allow/Disallow remote access to the console
- Allow/Disallow control panel write access
- Enable/Disable Ctl-X (reboot) and Ctl-C (abort)
- Save, restore, or reset nonvolatile data
- Reboot the LANplex system
- Display the system configuration
- Administer statistics baseline
- Administer the terminal and modem serial ports
- Set the system
- Set the console screen height