Terminal Connection; Modem Connection; Ip Management Interface; Initial Management Access - 3Com SuperStack II 3900 Getting Started Manual

40 C 5: Q S
HAPTER UICK

Terminal Connection

Direct access through the Console port is often
preferred because it allows you to monitor the system
during system boots. A Macintosh or PC attachment
can use any terminal emulation program for
connecting to the Console port. A workstation
attachment under UNIX can use the emulator TIP. For
more details, see the documentation that is shipped
with your terminal emulation program.

Modem Connection

You can manage the Administration Console using a
modem by establishing a connection between your
current Console session and the Console port. When
you configure the external modem from the
Administration Console menu system, the Console
appears to be directly connected to the external
modem. See the Command Reference Guide and the
Implementation Guide for more information.

IP Management Interface

An IP management interface is the connection
between the Switch 3900 system and a subnetwork.
It allows you to manage the system through any of
the Ethernet ports.
With an IP interface, you can use the rlogin or telnet
commands to access the Administration Console
using TCP/IP from a host computer; to manage the
system with an external management application; or
to manage the system with the Web Management
embedded software through an Internet browser.
M A
ETUP FOR ANAGEMENT CCESS

Initial Management Access

The first time that you access your system, you
connect through the Console port using a terminal.
These are the default settings for this port: 9600
baud, 8 bits, 1 stop bit, no parity.
When you first access the Administration Console
using the Console port, you see this prompt:
Select access level (read, write, administer):
At the prompt, enter:
1
administer
At the password prompt, press Return.
2
The Administration Console top-level menu appears:
Menu options (SuperStack II Switch-8C6AD7): -------------
system - Administer system-level functions
ethernet - Administer Ethernet ports
bridge - Administer bridging/VLANs
ip - Administer IP
snmp - Administer SNMP
analyzer - Administer Roving Analysis
script - Run a script of console commands
logout - Logout of the Administration Console
Use this menu to change the Console port baud
setting for the terminal or to configure your system
for another management access mechanism.