Ip Interface Summary - 3Com 4007 Command Reference Manual

226 C 12: I
HAPTER NTERNET

ip interface summary

Layer 2
Switching
Modules
Multilayer
Switching
Modules
P (IP)
ROTOCOL
Displays summary information about the IP interfaces that are configured
on a Multilayer Switching Module.
Valid Minimum Abbreviation
ip i su
Important Considerations
When you enter the command, you are prompted for an interface
index number even if you have only one interface defined.
The first line in the output (the status line) indicates whether IP routing
is enabled. It also indicates whether ICMP router discovery is enabled
on the module.
The Type field displays whether the IP interface is used for VLAN traffic
or for system management.
The VLAN index field displays the VLAN interface index number that is
associated with the IP interface.
Options
Prompt Description
Interface index Index number of the
IP interface whose
summary
information you
want to display
Fields in the IP Interface Summary Display
Field
Index
IP address
Possible Values
One or more
selectable interface
indexes
all
? (for a list of
selectable interface
indexes)
Description
Index number of the IP interface whose
summary information you want to display
IP address of the interface, chosen from the
range of addresses that the central agency
assigned to your organization.
[Default]
–