Headlamp Washer Relay Open - Chrysler Town and Country 2003 Owner's Manual

WINDSHIELD WIPER & WASHER
Symptom:

HEADLAMP WASHER RELAY OPEN

OPEN GROUND CIRCUIT
FUSED B+ CIRCUIT OPEN
HEADLAMP WASHER RELAY CONTROL CIRCUIT OPEN
HEADLAMP WASHER RELAY OUTPUT CIRCUIT OPEN
HEADLAMP WASHER PUMP MOTOR
HEADLAMP WASHER RELAY
FRONT CONTROL MODULE
TEST
1 Turn the ignition off.
Disconnect the Washer Pump connector.
Measure the resistance of the Washer Pump ground circuit.
Is the resistance below 5.0 ohms?
Yes → Go To 2
→ Repair the open Washer Pump ground circuit.
No
2 Turn the ignition on.
Disconnect the Headlamp Washer Relay.
Measure the voltage of the Fused B+ Circuit.
Is the voltage above 10.0 volts?
Yes → Go To 3
→ Repair the Fused B+ Circuit for an open condition.
No
3 Turn the ignition off.
Disconnect the Headlamp Washer Relay.
Disconnect the FCM harness connector.
Measure the resistance of the Headlamp Washer Relay Control Circuit.
Is the resistance below 5.0 ohms?
Yes → Go To 4
→ Repair the Headlamp Washer Relay Control Circuit for an open.
No
4 Disconnect the Headlamp Washer Relay.
Disconnect the Headlamp Washer Pump Motor.
Measure the resistance of the Headlamp Washer Relay Output Circuit.
Is the resistance below 5.0 ohms?
Yes → Go To 5
→ Repair the Headlamp Washer Relay Output Circuit for an open.
No
POSSIBLE CAUSES
ACTION
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
988
APPLICABILITY
All
All
All
All