[Maintenance]; [Support - Fuji Xerox ApeosPort-VII P5021 User Manual

6 General Settings

[Maintenance]

You can make a repair request or other adjustments of the device.
[Support Pages]
[Job Counter Report]
Reference
 For details, refer to "[Job Counter Report]" (P.102).
[Accounting Reports]
You can print an accounting report by each user. Note that the content on the screen
differs depending on whether the Accounting mode for services is enabled or not.
Note

You cannot output the report to a file. To output a report to a file, use ApeosWare Management Suite 2 (sold
separately).
 When [Accounting Type] is set to other than [Local Accounting]
When [Accounting Type] of each service is set to other than [Local Accounting], allowing
you to print a Meter Report (Print Jobs).

[Meter Report (Print Jobs)]
You can check the total number of printed pages and sheets of paper used, for each client
(job owner). [Meter Report (Print Jobs)] counts pages from the time at which the data is
initialized.
 When [Accounting Type] is set to [Local Accounting]
When [Accounting Type] is set to [Local Accounting], the [Accounting Reports] screen
appears. You can print the accounting report per user for the services of which the
Accounting mode is set to [Enable Accounting].
Reference
 For information on enabling the Accounting feature for each service, refer to "[Accounting]" (P.156).
Select an accounting report for each service and specify a range of user numbers.
Note

Selecting [Select All] selects all users.

[Accounting Report (Print Jobs)]
You can check the total number of printed pages and sheets of paper, used for each client
(job owner). [Accounting Report (Print Jobs)] counts pages from the time at which the data
is initialized.
Important

When [Print Jobs] is set to [Disable Accounting] in [Accounting Mode] under [Accounting Type], [Meter Report
(Print Jobs)] is displayed instead of [Accounting Report (Print Jobs)]. For more information, refer to "[Meter
Report (Print Jobs)]" (P.110).
Note

[No.] displayed on the report is the User Administration Number assigned when a user is registered under
[Accounting] or [Authentication / Security Settings].
110