Acura 2002 RSX Service Manual page 580

Automatic Transmission
I
{
System Description (cont'd)
Hydraulic Flow (cont'd)
E Position
The PcM controls the shift solenoid valves. The conditions of the shift solenoid valves and positions
of the shift valves
are as follows:
. Shift solenoid valve A: OFF Shift valve A keeps in
right side
. Shift solenoid valve B: ON Shift valve B moves
to left side
. Shift solenoid valve C: ON Shift valve C moves
to left side
. Shift solenoid valve D: OFF Shift valve D keeps
in left side
. Shift solenoid valve E: OFF Shift valve E keeps
in left side
Line pressure (1) flows to the shift solenoid valves and the A,,/T clutch pressure control solenoid
valve A, and changes
to 4v/T clutch pressure control solenoid valve A pressure (55) at the A/T clutch pressure control
solenoij valve A. A/T
clutch pressure control solenoid valve A pressure (bS) becomes line pressure (18) at the shift valve
A, and stops at the
manual valve. Under this condjtion. hydraulic pressure is not applied to the clutches.
NOTE: When used, "1eft" or "right,, indicates direction on the hydraulic circuat.
3?3'* 1".1,"" 1g,"111,"***
AccuMULAroR 6iurcH
\
14-48