Acura 2002 RSX Service Manual page 848

8. Tighten the rack guide screw (A) to 25 N.m (2.5
kgf.m, 18lbf.ft), then loosen it.
'15" Max.
,_---+
r'--__
B
25 N.m
{2.5 kgf.m, 18 lbf ft)
9. Retighten the rack guide screw to 8 N m {0 8 kgf m'
6 lbf.ft), then back it off to specified angle.
Specified Return Angle; l5' Max'
1
' ].
Hold the rack guide screw stationary with a wrench'
and tighten the locknut by hand until it is fully
seated.
I n s t a l l t h e s p e c i a l t o o l o n t h e l o c k n u t ( B ) , a n d h o l d
the rack guide screw (A) stationary with a wrench.
Tighten the locknut an additional 30" with the
s p e c i a l t o o l .
12, lnstallthe transmission mount bracket (see step 9
o n p a g e 5 - 1 2 ) .
'13. Reinstall the return hose clamps and heat shield.
14. Check tor unusual steering effort through the
comPlete turning travel.
15. Check the steering wheel rotation play andthe
power assist (see page 17-71.
1 0 .
17-31