Acura 2002 RSX Service Manual page 141

Cylinder Head
Auto-Tensioner Removal/
Installation (cont'dl
3. Remove old liquid gasketfrom the chain case cover
mating surfaces. bolts and bolt holes.
4. Clean and dry the chain case cover matjng surfaces.
5. Apply liquid gasket, p/N 08718-0009, eventy ro the
chain case mating surface of the chain case cover
and to the inner threads of the holes.
NOTE: Do not install the parts if 5 minutes or more
have elapsed since applying liquid gasket. lnstead,
reapply liquid gasket after removing oil residue.
Apply liquid gasket
along the brolen tine.
6. Install the chain case cover.
/ ' - t . - - \
\
I I
{ t a
\
_ . / l
\ - - = ;
Y1,
('1.2 ksf.m,
8.7 tbt.ft)
6-24
Chain Case Oil Seal Installation
Special Tools Required
. Driver 07749-0010000
. Attachment, 52 x 55 mm 07746-00i04OO
1. Use the special tools to drive a new oil seal
squarely into the chain case to the specified
installed height.
07749-00 t0000
2. Measure the distance between the chain case
surface (A) and oil seal {B).
Oil Seal Installed Height:
3 3 . 0 - 3 3 . 7 m m ( 1 . 3 0 - 1 . 3 3 i n . )
33.0-33.7 mm
{1.30-1.33 in.l