Brake Booster Replacement - Acura 2002 RSX Service Manual

Brake Booster Replacement
Remove the master cylinder (see page 19-151.
Disconnect the vacuum hose (A) from the brake
booster.
A
Remove the master cylinder brake lines (B) from
the brake line holder.
Remove the clip (A) and the joint pin {B), and
disconnect the yoke from the brake pedal.
9 tbf.ft)
Remove the brake booster mounting flange
n u t s ( C l .
1 .
2 .
6. Remove the brake booster (A) from the engine
compartment.
lnstallthe brake booster in the reverse order of
removal, and note these items:
. Adiustthe pushrod clearance before installing
the brake booster {see page 19-16).
. Use a new clip whenever installing.
. After installing the brake booster and master
cylinder, fill the reservoir with new brake fluid,
bleed the brake system (see page 19-8), and
adjust the brake pedal height and free play {see
p a g e 1 9 - 6 ) .
7 .
:
a
b t -
L I =Q/
,
19-19