Acura 2002 RSX Service Manual page 655

Pressure Tests
Special Tools Required
'A,/l oil pressure gauge set
07406-0020400 or 07406-0020401
. A " / T p r e s s u r e h o s e , 2 2 1 0 m m 0 7 M A J - P Y 4 0 1 1 A
. A/T pressure hose adapter 07MAJ-PY40120
1. Before testing, be sure the transmission is filled to
the proPer level.
2. Raise the front ofthe vehicle. and make sure it is
securely supported. Set the parking brake, and
block rear wheels securelY.
Or lift up the vehicle.
3. Allow the front wheels to rotate freely.
4. Warm up the engine (the radiator fan comes on),
then turn the engine off, and connect the
tachometer.
5. Connect the oil pressure gauge to the line pressure
inspection hole (A) and 4th clutch pressure
inspection hole (B). Do not allow dust or other
foreign particles to enter the holes while
connecting the gages.
A/T OIL PRESSURE
GAUGE SET W/PANEL
07406-0020400 or
07406-0020it01
(66A)
\=::;:::':i#
H H H
\\\\\\
A/T PRESSURE
H O S E . 2 2 1 0 m m
OTMAJ-PY4O11A
(4 Required)
,zA
tfl tn
\\\ ,/1
>
A/T PRESSURE
HOSE ADAPTER
07MAJ-PY40120
{4 Required}
6. Remove the air cleaner housing, and connect the
oil pressure gauge to the 2nd clutch pressure
inspection hole (C). Then temporarily reinstallthe
a i r c l e a n e r h o u s a n g .
't.
Connect the oil pressure gauges to the 1st clutch
pressure inspection hole (D).3rd clutch pressure
inspection hole (E), and 5th clutch pressure
inspection hole (F).
(cont'd)
14-123