Acura 2002 RSX Service Manual page 776

Transmission Housing
Shaft Assemblies and Housing Installation (cont,dl
NOTE: Refer to the Exploded View as needed during the
following procedure.
1. Install the differential assembly in the torq ue
converter housing.
2. Assemble the mainshaft, countershaft, and
secondary shaft.
3. Join the mainshaft subassembly (A), countershaft
subassembly 1B), and secondary shaft sub-
assembly (C) together, and install them in the
torque converter housing.
14-244
4. lf the detent arm was removed. install the detent
arm {A)with arm collar (B) on the servo body (C),
and install the new lock washer (D) by aligning its
cutout (E) with the projection (F) of the servo bodv.
Install and tighten the bolt, then bend the lock tab
of the lock washer against the bolt head.
x 1 . 0 m m
12 N m (1.2 kgf.m,8.7 lbl.ftl