Acura 2002 RSX Service Manual page 791

Carrier Bearing Preload Inspection
Special Tools Required
. Driver 07749-0010000
. Attachment. T2 x 75 mm 07746-0010600
. Preload inspection tool 07HAJ-PK40201
NOTE:
. lf the transmission housing, torque converter housing,
differential carrier, carrier bearing and outer race, or
t h r u s t s h i m w e r e r e p l a c e d . t h e b e a r i n g p r e l o a d m u s t
be adjusted.
. Coat all pans with ATF during installation.
. Do not use the thrust shim in the torque converter
h o u s r n g .
1. Remove the bearing outer race (A), 76.2 mm thrust
w a s h e r ( B ) , a n d 7 6 m m t h r u s t s h i m ( C ) f r o m t h e
transmission housing {D) by heating the housing to
a b o u t 2 1 2 ' F ( 1 0 0 ' C ) w i t h h e a t g u n ( E ) . D o n o t h e a t
t h e h o u s i n g i n e x c e s s o f 2 1 2 ' F ( 1 0 0 " C ) .
NOTE: Let the transmission housing cool to room
temperature before adjusting the bearing preload.
2 . I n s t a l l t h e 7 6 m m t h r u s t s h i m o f 2 . 6 m m ( 0 . 1 0 2 i n . )
in thickness (P/N 41449-PK4-000) (A) in the
t r a n s m i s s i o n h o u s i n g ( B ) .
lnstall the 76.2 mm thrust washer (C) and the
bearing outer race (D) in the transmission housing.
Drive the bearing outer race in securely so there is
no clearance between the outer race, thrust washer.
shim, and housing with the special tools.
07 7,r9-001 0000
07746-0010600
(cont'd)
14-259