Shift Lever Installation
1. Install the shift lever assembly.
I x 1.25 mm
22 N m {2.2 kgl.m, 16lbt.ftl
2, Connect tra nsmission gear selection switch/park
oin switch connector (Al and shift lock solenoid
connector (B), and install the harness clamps (Cl on
the shift lever bracket base.
3. Turn the ignition switch ON (ll), and verify that the
E position indicator comes on.
lnstall the shift cable to the shift lever (see step 5 on
page 14-163). lf necessary, adjust the shift cable.
14 -1 59