Cowl Covers Replacement - Acura 2002 RSX Service Manual

Exterior Trim
1 .
Cowl Covers Replacement
D > : C l i p , 5
Remove the windshield wiper arms (see page 22-150).
Using a clip remover, detach the clips (A), then remove the hood rear seal (B), and detach the clips (C) from the
cowl covers. Take care not to scratch the cowl covers.
Fastener Locations
A > : C l i p , 9 C ) : C l i p , 3
/A\
\\J/ ,2X|VZ7
f f i i l " = F
tf,
\v
E > : C l i p , 3
w
\]Jr
c
V
Detach the clips (D, E) and release the hook (G) by carefully pulling the passenger,s cowl cover (F) upward. pull the
cover forward to release the hooks (H), and pull the hinge cover (l) out from the front fender (J ). then remove the
cover. Take care not to scratch the body.
Remove the windshield wiper sub-harness grommet (K) from the driver,s cowl cover (L).
Detach the clips (D. E) by carefully pulling the driver's cowl cover upward, and pull the cover forward to release
the hooks (M). Pull the hinge cover (N) out from the front fender (O). then remove the cover. Take care not to
scratch the body.
Installthe cover in the reverse order of removal, and note these items
. R e p l a c e a n y d a m a g e d c l i p s .
. Push the clip portions into place securely.
20-98