Acura 2002 RSX Service Manual page 136

7 . I n s t a l l t h e c a m c h a i n g u i d e B .
x 1.25 mm
22 N.m
{2.2 kgf.m, 16lbf.ft}
8, Remove the pin from the auto-tensloner.
Check the chain case oil seal for damage. lf the oil
seal is damaged, replace the chain case oil seal
(see page 6-24).
9 .
1 0 .
1 1 .
Remove old liquid gasket from the chain case
mating surfaces, bolts. and bolt holes.
Clean and drv the chain case mating surfaces.
Apply liquid gasket. P/N 08718-0009' evenly to the
cylinder block mating surface of the chain case and
to the inner threads of the holes.
Apply liquid gasket to the cylinder block upper
surface contact areas (A) on the chain case.
Apply liquid gasket, P/N 08718-0009, evenlytothe
oil pan mating surface of the chain case and to the
inner threads of the holes.
NOTE: Do not instatl the parts if 5 minutes or more
have elapsed since applying liquid gasket. Instead,
reapply liquid gasket after removing oil residue.
(cont'd)
1 3 .
1 4 .
Apply liquid gasket
along the broken lane.
Apply liquid gasket
along the broken line.
6-19