Acura 2002 RSX Service Manual page 734

Valve Body
ATF Pump Inspection
1 . Install the ATF pump drive gear (A), driven gear (B),
and ATF pump driven gear shaft (C) in the main
valve body {D). Lubricate all parts with ATF, and
install the ATF pump driven gear with its grooved
and chamfered side facing up.
14-202
2. Measure the side clearance of the ATF pump drive
gear (A) and driven gear (B).
ATF Pump Gears Side {Radial} Clearance:
Standard {New):
ATF Pump Drive Gear
0.210 0.265 mm (0.0083 0.0104 in.l
ATF Pump Driven Gsai
0.070 - 0.125 mm {0.0028-0.0049 in.}
3. Remove the ATF pump driven gear shaft. Measure
the thrust clearance between the ATF pump driven
gear (A) and tho valve body (B) with a straight edge
(C) and a feeler gauge (D).
ATF Pump Drive/Driven Gear Thrust (Axiall
Clearance:
Standard {New):
0.03 0.05 mm (0.001 - 0.002 in.)
Service Limit:
0.07 mm (0.003 in.l