Side Sill Panel Rep|Acement - Acura 2002 RSX Service Manual

Exterior Trim
Side Sill Panel Replacement
1. Remove the side sill Danel.
-1 lf equipped, remove the splash guard (A).
-2 Pull the inner fender (B) backas necessary, and remove the expansion clip (C).
-3 Slide the side sill panel (D) forward, and remove it. The side clips (E) will stayinthebody.
-4 Remove the side clips from the body.
Fastongr Locations
) : Screw. 4
C> : Clip, 4
E > : C l i p , 8
6rF A
\1/
@
M_
an
Replace any damaged clips.
Install the side clips on the side sill panel.
Hold the panel up, and fit all the side clips into the holes in the body, then push on the panel until the clips snap
Into place,
Install allthe expansion clips.
Reinstall the inner fender and splash guard (if equipped).
ll
c
6.
20-100