Acura 2002 RSX Service Manual page 965

ABS Components
9 .
1 0 .
ABS Indicator Circuit Troubleshooting (cont'd)
Turn the ignition switch oN fl).
Connect the ABS control unit 25P connecror
terminal No, 7 and body ground with a jumper wire.
ABS CONTROL UNIT 25P CONNECTOR
JUMPER
WIRE
Wire side of female terminals
Does the ABS indicator go otf?
YES-Check for loose terminals in the ABS control
unit 25P connector. lf necessary, substitute a
known-good ABS modulator-control unit, and
recheck,I
N O - G o t o s t e p 1 1 .
Connect the gauge assembly connector A (22p)
terminal No. 14 and body ground with a jumper
w i r e .
GAUGE ASSEMBLY CONNECTOB A (22P)
WALP IELU/RED)
JUMPER WIRE
Wire side ot temate terminals
Does the ABS indicator go olf?
YES Repair open in the wire between the gauge
assembly and the ABS control unit.l
NO-Check for loose gauge assembly connectors.
lfthe connector is OK, replace the gauge
assembly.l
1 1 .
19-56