lI-iF
3. Release the fasteners (A) and hook (B).
Pull back the seat-back cover (A). and remove the
clips (B).
A
5. Pull back the seat-back cover (A) allthe way around.
Remove the latch knob (B). and remove the latch
collar {C) by pinching the end and pulling it out.
Remove the seat-back cover,
lnstall ihe cover in the reverse order of removal,
and note these items:
. To prevent wrinkles when installing a seat-back
cover, make sure the material is stretched evenly
over the pad before securing the hook and clips.
. Replace any clips you removed with new ones.
lnstall them with commerciallV available
upholstery ring pliers.
7 .
20-85